Detailing
Premium Detailing, Paint Correction & Ceramic Coatings — Lewiston / Auburn, Portland, Maine
We combine craft-led paint correction, meticulous prep, and certified Opti-Coat installation to deliver durable, easy-to-maintain finishes. Serving Lewiston–Auburn (L/A), Portland, Brunswick, Augusta, and the Greater Portland area.
What Sets Us Apart
Paint Correction Expertise
Targeted cut → polish → refine proven on a test-section; we improve clarity without over-working the finish.
Targeted cut → polish → refine proven on a test-section; we improve clarity without over-working the finish.
Certified Opti-Coat® Installer
Pro, Pro+, and Pro3 professionally installed indoors and registered directly with Opti-Coat.
Pro, Pro+, and Pro3 professionally installed indoors and registered directly with Opti-Coat.
Extreme Attention to Detail
Tape-line discipline, tight crevice work, consistent panel prep, clean-room habits.
Tape-line discipline, tight crevice work, consistent panel prep, clean-room habits.
Facility Advantage
Bright inspection lighting, dust-managed bays, controlled indoor cure windows; secure storage on-site.
Bright inspection lighting, dust-managed bays, controlled indoor cure windows; secure storage on-site.
Classic-Safe Methods
Single-stage & lacquer expertise: limited passes, interface pads for contour control, period-correct protection.
Single-stage & lacquer expertise: limited passes, interface pads for contour control, period-correct protection.
Clear Scopes, Honest Results
We set targets up front and protect the finish—no chasing every last isolated scratch at the expense of longevity.
We set targets up front and protect the finish—no chasing every last isolated scratch at the expense of longevity.
Overview of Services
Interior Detailing
- Express Interior — Vacuum, light wipe-down, glass.
- Interior Reset — Extraction, steam/chemical cleaning where safe, leather/vinyl clean & condition, compartments, headliner spot-clean, UV protection.
- Add-ons: Pet hair removal, ozone/odor treatment, targeted salt-stain removal.
Exterior Detailing
- Wash & Wheels — Hand wash, wheels/wells cleaned, tires dressed.
- Wash / Clay / Wax — Mechanical decon + wax/sealant for smoothness and gloss.
- Exterior Reset — Full decon (iron/tar/clay), wheels/wells, sealant.
Paint Correction
- 1-Step Polishing — Gloss boost & light defect reduction; excellent pre-coating baseline.
- Multi-Step Correction — Cut → polish → refine for deeper defects while protecting the finish.
- Edge & body lines treated with discipline; results are durable and honest (no heavy fillers).
Opti-Coat Ceramic Coatings
- Pro • Pro+ • Pro3 — Installed indoors after proper prep and correction to target.
- Options for glass, trim, and wheels/calipers.
- Warranty registered directly with Opti-Coat. See Opti-Coat terms for coverage details.
Specialty & Add-Ons
- Spot correction & isolated repair work
- Headlight restoration with protective topcoat
- Engine bay cosmetic tidy
Paint Correction — Craft-Led Finish Restoration
Our correction is a controlled, test-proven process that protects the finish while reopening clarity. We balance results with longevity rather than chasing every last deep scratch.
- Decon — Citrus pre-wash, hand wash, iron/tar removal, clay as needed.
- Mask & Inspect — Tape edges/trim/emblems; inspect under varied lighting to identify repaints, previous work, and sensitive zones.
- Test Section — Establish pad/liquid/machine combo and achievable target for your paint system (OEM, single-stage, or respray).
- Cut → Polish → Refine — Wool/microfiber for removal, foam for refinement; long-throw DA/rotary/forced-rotation as appropriate.
- Panel Prep — Solvent wipe removes residues prior to protection or coating.
Ceramic Coatings — Opti-Coat® Pro, Pro+ & Pro3
We are certified to install the full Opti-Coat professional line. Proper prep and correction come first; coatings preserve—not fix—what’s underneath.
Opti-Coat Pro
- Professional ceramic for durable gloss & protection
- Ideal for daily drivers and year-round use
Opti-Coat Pro+
- Pro base + Pro+ top layer for higher gloss & repellency
- Great balance of look and longevity
Opti-Coat Pro3
- Flagship multi-layer system for maximum durability
- Best for high-value vehicles and garage-kept finishes
Surfaces Beyond Paint
- Glass (visibility & hydrophobics)
- Exterior plastics/trim (UV stability)
- Wheels/calipers (simplified cleaning)
Interior Detailing — Clean, Dry, Non-Greasy
Express Interior
- Vacuum seats, floor, trunk; compressed-air crevice work
- Light wipe-down of dash/console/door cards
- Interior glass cleaned
Interior Reset (Deep Clean)
- Mats extracted; carpets/fabric scrubbed and extracted where safe
- Leather/vinyl cleaned with material-appropriate chemistry; leather conditioned
- Compartments & touch points detailed; headliner spot-cleaned
- Non-gloss UV protectant
Add-ons: Pet Hair Removal • Ozone/odor treatment • Targeted salt-stain removal
Exterior Detailing
Wash & Wheels
Hand wash with safe media, wheels/wells cleaned, tires dressed.
Wash / Clay / Wax
Mechanical decon with clay followed by wax/sealant for smoothness and gloss.
Exterior Reset
Full decon: iron/tar removal, clay as needed, wheels/wells cleaned, and sealant protection.
Maintenance Plans — Keep the Finish Performing
Monthly Hand Wash
Two-bucket method, quality mitts/towels, touch-safe drying. Ideal for coated and uncoated vehicles.
Two-bucket method, quality mitts/towels, touch-safe drying. Ideal for coated and uncoated vehicles.
Seasonal Decon
Iron/tar removal, clay as needed, fresh sealant. Resets slickness and repellency.
Iron/tar removal, clay as needed, fresh sealant. Resets slickness and repellency.
Winter Prep & Spring Reset
Pre-winter protection and post-winter cleanup to manage Maine salt and sand.
Pre-winter protection and post-winter cleanup to manage Maine salt and sand.
Classics, Muscle & Specialty Vehicles
We’re fluent in single-stage, lacquer, and aged resprays. The goal is preservation with tasteful refinement—especially on edges, body lines, and thin areas.
- Verify finish type; manage pigment transfer on single-stage
- Interface pads maintain contour and reduce strike-through risk
- Limited, controlled passes with period-correct protection options
Detailing FAQ
Do coatings fix scratches?
No—coatings preserve what’s on the surface. We correct defects first, then coat to lock in clarity.
Is one-step polishing enough?
For newer or well-kept paint, 1-Step is often ideal. For heavier defects, multi-step correction is recommended.
How do you protect thin or repainted areas?
We inspect under varied lighting, limit passes, switch pad/liquid combos, and adjust targets to protect the finish.
What maintenance keeps results looking new?
Coating-safe hand washes, periodic decon, careful drying, and avoiding harsh chemicals. We offer plans to keep performance high.